product_banner
IDE/SATA/CF
Your current location:Home > Product Center > IDE/SATA/CF
IDE/SATA Converter Bi-directional IDE <-> SATA MM-BIR-IDE/SATA
image
left right
image image image image image image
Product name: IDE/SATA Converter Bi-directional IDE <-> SATA
Product model: MM-BIR-IDE/SATA
Product description:

Bi-Directional converter for Serial ATA and Parallel ATA. This Adapter Does-it-All, SATA Hard Drive to IDE Converter or IDE Hard Drive to SATA Host Converter.
This is a bi-direction converter for serial and parallel ATA translation. It includes the Serial ATA PHY, Link, Transport, and Parallel ATA (application layer) controller.
The Serial ATA physical, link, and transport layers are compliant to Serial ATA 1.0.This converter supports 1.5GHz data rate.

 

  • Jmicro JM20330 Chipset
  • Plug & Play and Hot-swapping capability
  • 150MB/s transfer rate
  • Automatic SATA 3.0/1.5 Gbps speed negotiation
  • Serial-ATA 1.0 specification compliant
  • Support Serial ATA hot-plug
  • Support ATA Host Bridge
  • Support ATA PIO and UDMA modes 0 to 4
  • ATA / ATAPI Ultra DMA of transfer rate 16.7, 25, 33, 48, 66, 100, 133, and 150MB/s
  • ATA / ATAPI LBA48 addressing mode associated with 2-byte sector count
  • Support 3.5” IDE hard drives and 5.25” optical drives
  • Ultra low power consumption
  • Work for both AC and DC couple between the transmitter and the receiver
  • Provide specified OOB signal detection and transmission
  • Support Spread Spectrum Clocking to reduce EMI
  • Support Partial/Slumber power management
  • Provide adjustable TX signal amplitude and pre-emphasis level
  • Master/Slave mode support
  • Support Windows 98SE/ME/2000/XP Operating System
  • Dimensions: 6.5 x 4.5 x 1.5 inches
 
Share to: